User guide

Troubleshooting
5. Close both latches against the front of the drive until they snap into
place 1. Levers on each latch should catch behind the metal lip at the
front of the bay 2, drawing the drive into position and securing it in
place.
1
1
2
Figure 4-30. Latching the drive into place
The drive tray LEDs light one at a time and then turn off together to indicate
that the system has recognized the new drive. In fault-tolerant configurations,
allow the replacement drive to be reconstructed automatically with data from
the other drives. While reconstruction is in progress, the Online LED flashes.