User guide

Running the Array Configuration Utility
When creating a logical drive, you can select a fault-tolerance (RAID level)
option and provide information regarding the drive size, array accelerator, and
stripe size.
1. Select Array A or the Unused Space icon under Array A in the Logical
Configuration View.
2. Click the Create Logical Drive button. A screen similar to the following
figure is displayed.
Figure 6-7. Create Logical Drive screen
3. In the upper-left area of this screen, click the Distributed Data Guarding
(RAID 5) option button.
4. Click the Array Accelerator Enable button.
5. Stripe Size can be left at the default for the selected RAID level, or set
to another value. See the section titled “Creating Logical Drive Screen”
later in this chapter for a detailed description.