HP VPN Firewall Appliances Network Management Configuration Guide

858
[Firewall-Tunnel0] quit
3. Configure OSPFv3:
# Configure OSPFv3 on Router A.
[RouterA] ospfv3 1
[RouterA-ospfv3-1] router-id 1.1.1.1
[RouterA-ospfv3-1] quit
[RouterA] interface ethernet 1/1
[RouterA-Ethernet1/1] ospfv3 1 area 0
[RouterA-Ethernet1/1] quit
[RouterA] interface ethernet 1/2
[RouterA-Ethernet1/2] ospfv3 1 area 0
[RouterA-Ethernet1/2] quit
[RouterA] interface tunnel 0
[RouterA-Tunnel0] ospfv3 1 area 0
[RouterA-Tunnel0] quit
# Configure OSPFv3 on Router B.
<RouterB> system-view
[RouterB] ospfv3 1
[RouterB-ospfv3-1] router-id 2.2.2.2
[RouterB-ospfv3-1] quit
[RouterB] interface ethernet 1/1
[RouterB-Ethernet1/1] ospfv3 1 area 0
[RouterB-Ethernet1/1] quit
[RouterB] interface ethernet 1/2
[RouterB-Ethernet1/2] ospfv3 1 area 0
[RouterB-Ethernet1/2] quit
# Configure OSPFv3 on the firewall.
[Firewall] ospfv3 1
[Firewall-ospfv3-1] router-id 3.3.3.3
[Firewall-ospfv3-1] quit
[Firewall] interface gigabitethernet 0/1
[Firewall-GigabitEthernet0/1] ospfv3 1 area 0
[Firewall-GigabitEthernet0/1] quit
[Firewall] interface gigabitethernet 0/2
[Firewall-GigabitEthernet0/2] ospfv3 1 area 0
[Firewall-GigabitEthernet0/2] quit
[Firewall] interface tunnel 0
[Firewall-Tunnel0] ospfv3 1 area 0
[Firewall-Tunnel0] quit
4. Enable IPv6 multicast routing, IPv6 PIM-DM, and MLD:
# On Router A, enable IPv6 multicast routing globally, and enable IPv6 PIM-DM on each interface.
[RouterA] multicast ipv6 routing-enable
[RouterA] interface ethernet 1/1
[RouterA-Ethernet1/1] pim ipv6 dm
[RouterA-Ethernet1/1] quit
[RouterA] interface ethernet 1/2
[RouterA-Ethernet1/2] pim ipv6 dm