Serviceguard Disaster Recovery Products Compatibility and Feature Matrix (Metrocluster with Continuous Access for P9000 and XP) - HPUX and Linux

2
Serviceguard Disaster Recovery Products Compatibility and Feature Matrix (Metrocluster with
Continuous Access for P9000 and XP) - HPUX
NOTE: The tables on the following pages contain compatibility and features information for released versions of the HP Metrocluster with
Continuous Access for P9000 and XP product.
NOTE: Certification of storage will only be valid till the published support life of the arrays itself.
Metrocluster with
Continuous Access for
P9000 and XP Version
HP-UX
Version
SG Version
MCDREnabler
fileset
Version
1
XP/P9000 Platform & Microcode2
Raid Manager
Version
Feature(s)
A.11.00
(September ’10)
Documentation for this
product version:
11i v2
A.11.19
A.10.0x
XP512/48: 01-19-99-00/or later
XP1024/128: 21-14-40-00 or later
XP10000: 50-09-78-00 or later
XP12000: 50-09-78-00 or later
XP20000: 60-04-04-00 or later
XP24000: 60-04-04-00 or later
P9500: 70-01-04-00/00 or later
3DC configuration:
3DC Sync/CAJ replication:
XP10000/XP12000: 50-09-94-00 or later.
XP20000/XP24000: 60-05-16-00 or later
P9500: 70-01-26-00/00 or later
3DC CAJ/CAJ replication: XP20000/XP24000:
01.22.06 or later
for all XP arrays
01.24.13 or later
for P9500 arrays
3
3DC Sync/CAJ &
CAJ/CAJ
replication:
01.23.08 or later
for all XP arrays
01.24.13 or later
for P9500 arrays
4
Enhancements with this revision:
1. Support for Oracle 11gR2 (single instance and RAC)
2. DRD support
3. Support for Manual Site switching
5
4. Oracle ASM support for Metrocluster for RAC
5. Manageability improvements for Metrocluster with Serviceguard
Manager
6. SADTA support of CVM/CFS 5.0.1 (Serviceguard Storage
Management Suite A.03.01)
7. Support for Modular package in 3DC solution
8. Support for Complex Workloads in 3DC solution using SADTA
9. Support for Remote Command Device
10. Added support for P9500 arrays (October’2010)
April 2011 patch features:
11. Easy Deployment using Serviceguard Manager
12. Metrocluster verification using cmcheckconf or Serviceguard
Manager
13. Metrocluster support for 3DC CAJ/CAJ and 3DC Sync/CAJ
11i v3
A.11.19
and
A.11.20
1
Note: All four Metrocluster products share the same MCDREnabler fileset. Different Metrocluster products can be installed and configured in the same cluster. Only Metrocluster products with the same MCDREnabler version can coexist on the
same node and cluster.
2
Note: This table represents what has been certified and is supported. If other storage, microcode or Raid Manager versions are available but not indicated in this table, it is currently not supported by Metrocluster with Continuous Access for
P9000 and XP. The table will be updated when new versions are certified.
3
The following features introduced in HP StorageWorks P9000 RAID Manager are not supported with Metrocluster: Virtual Command Device via LAN, Copy Group configuration based on RAID, User Authentication based on Command Device.
The User Authentication for the Command Device Security must be disabled in a Metrocluster environment.
4
The following features introduced in HP StorageWorks P9000 RAID Manager are not supported with Metrocluster: Virtual Command Device via LAN, Copy Group configuration based on RAID, User Authentication based on Command Device.
The User Authentication for the Command Device Security must be disabled in a Metrocluster environment.
5
Note: Manual site switching is supported with Serviceguard A.11.20 only when PHSS_41225 is installed.