HP Scripting Tools for Windows PowerShell User Guide: OA cmdlets

Table 1 HP OA Cmdlets for Windows PowerShell (continued)
DescriptionCmdlet
All servers in the enclosure should be powered off before clearing the
VCMODE.
Clear-HPOAVCMode
Connects to an OA and creates an SSH session.Connect-HPOA
Closes an SSH session with the OA.Disconnect-HPOA
Find list of OA in a specified subnet.Find-HPOA
Shows the specified direct attached blade device serial number.Get-HPOABladeDeviceSerialNumber
Displays a list of installed CA certificates.Get-HPOACACertificate
Shows the certificate information for the OA.Get-HPOACertificate
Displays the script required to recreate the settings of the enclosure.Get-HPOAConfig
Displays the current date, time, and time zone of the internal clock of the
enclosure.
Get-HPOADate
Displays EBIPA information.Get-HPOAEBIPA
Displays information for current status of the specified enclosure fan.Get-HPOAEnclosureFan
Displays enclosure information.Get-HPOAEnclosureInfo
Displays information about the Insight Display screen.Get-HPOAEnclosureLCD
Displays the current Enclosure Dynamic Power Cap in watts.Get-HPOAEnclosurePowerCap
Displays the bays in the enclosure that are exempt from the Enclosure
Dynamic Power Cap.
Get-HPOAEnclosurePowerCapBaysToExclude
Displays a detailed summary of the enclosure's present power state.Get-HPOAEnclosurePowerSummary
Displays power supply details of the enclosure.Get-HPOAEnclosurePowerSupply
Displays the basic health and status of the enclosure subsystem.Get-HPOAEnclosureStatus
Displays the highest ambient temperature being reported by the installed
blade devices.
Get-HPOAEnclosureTemp
The FRU Summary section provides information on all field replaceable units
within the enclosure.
Get-HPOAFRU
Displays the firmware log for the selected server or range of servers.Get-HPOAFWLogServer
Displays the firmware log session for the selected server or range of servers.Get-HPOAFWLogSession
Displays enclosure firmware management configuration settings.Get-HPOAFWManagement
Displays the enclosure firmware management log.Get-HPOAFWManagementLog
Displays a summary of enclosure firmware components.Get-HPOAFWSummary
Displays current health of all components in the enclosure.Get-HPOAHealth
Displays the current HP SIM SSO configuration for the OA.Get-HPOAHPSIMInfo
Displays information about the OA.Get-HPOAInfo
Displays interconnect settings and information.Get-HPOAInterconnectInfo
Displays the interconnect list.Get-HPOAInterconnectList
Displays the port mapping or the specified interconnects or range of
interconnects.
Get-HPOAInterconnectPortMap
Displays the PowerDelay status for the specified interconnects or range of
interconnects.
Get-HPOAInterconnectPowerDelay
8 HP Scripting Tools for Windows PowerShell cmdlets