HP Scripting Tools for Windows PowerShell User Guide: OA cmdlets

Table 1 HP OA Cmdlets for Windows PowerShell (continued)
DescriptionCmdlet
Displays enclosure devices that are available for firmware upgrade.Get-HPOAUpgradableDevice
Displays uptime for the OA.Get-HPOAUpTime
Displays which USB controller is currently enabled.Get-HPOAUSB
Displays a list of firmware images, configuration scripts, ISO images and
other binary files present on the enclosure USB media.
Get-HPOAUSBKey
Displays all the user list or the specified user's details.Get-HPOAUser
Displays Virtual Connect Mode settings.Get-HPOAVCMode
Shows VLAN settings.Get-HPOAVLAN
Removes the specified trust certificate (CA, HPSIM, LDAP).Remove-HPOACertificate
Removes the IP address of a DNS server from the list for the specified OA.Remove-HPOADNS
Removes the DNS server specified by the IP address from the list of DNS
servers for either SERVER bays or INTERCONNECT bays.
Remove-HPOAEBIPA
Removes the IPv6 static address for the OA.Remove-HPOAIPv6Address
Removes the user specified language.Remove-HPOALanguage
Disables access to the bays for the specified LDAP group.Remove-HPOALDAPBay
Removes LDAP group from the system.Remove-HPOALDAPGroup
Disables access to the OA for the specified LDAP group.Remove-HPOALDAPPrivilege
Removes an IP address from the list of systems that receive SNMP traps.Remove-HPOASNMPTrapReceiver
Removes the specified SNMP user.Remove-HPOASNMPUser
Removes an IPv4 or IPv6 address from the list of addresses being handled
by the IP Security feature.
Remove-HPOATrustedHost
Removes a user from the system.Remove-HPOAUser
Removes user access from a bay.Remove-HPOAUserBay
Removes the certificate associated with a user.Remove-HPOAUserCertificate
Removes the OA from the control of the user to whom the OA is currently
assigned.
Remove-HPOAUserPrivilege
Restarts OA, server, interconnect specified by bay number.Reset-HPOA
Saves EBIPA settings to flash drive.Save-HPOAEBIPA
Enables or disables logging of inventory and health status for shared
infrastructure items such as fans and power supplies to the blades that
depend upon them.
Set-HPOAActiveHealthSystem
Enables or disables the sending of alert emails when an event occurs and
also edits the Alertmail settings.
Set-HPOAAlertmail
Sets the serial number of the specified Storage, Tape, or I/O expansion
blade.
Set-HPOABladeDeviceSerialNumber
Sets the date of the enclosure.Set-HPOADate
Enables or disables DHCP domain name and sets the domain name for the
OA.
Set-HPOADHCPDomainName
Enables or disables DHCPv6 mode for management interfaces of all devices
in the enclosure.
Set-HPOADHCPv6
10 HP Scripting Tools for Windows PowerShell cmdlets