NetWare Client for DOS and MS Windows User Guide

11-11

Conﬁguring Client Workstations for Desktop SNMP Services

Modifying DOS System and NetWare Client Conﬁguration Files

add the following lines to the NET.CFG file in the order given:

netware dos requester

use defaults = off

vlm = wssnmp.vlm

vlm = wstrap.vlm

vlm = wsreg.vlm

vlm = wsasn1.vlm

vlm = mib2if.vlm

vlm = wsdrvprn.vlm

vlm = mib2prot.vlm

See the following sections in Chapter 2, “NetWare DOS Requester Option,” in

NetWare Client for DOS and MS Windows Technical Reference for details on

how to conﬁgure for Desktop SNMP:

• “Asynchronous timeout”

• “Community names”

• “MIB-II support”

• “Transport providers”

After you have completed the initial conﬁguration of the Desktop SNMP

agent, you can further modify the Desktop SNMP options in the NET.CFG

ﬁle to meet your speciﬁc network requirements.

Sample NET.CFG File for Desktop SNMP Services

Following is a sample of the NET.CFG for Desktop SNMP services:

link driver ne2000

port 300

int 3