Using the HP DTC Manager/UX

169
Using dtclist
14
-t range Specifies the range of dates and times to be displayed. The dates are in a free
format, such as month-day-year all in numbers or in words. For example, 8 Apr
1997
and Wed Apr 9 1997 are two ways to specify the same date. Quotation
marks (") are used to delimit a range.
date1<date2 Displays events that were logged between date1 and
date2 including those dates.
<date1 Displays events that were logged on date1 and earlier.
date1< Displays events that were logged on date1 and later.
-f Displays events as they are logged.
object The object parameter specifies the DTC, board, or port to be listed. Configuration
information or networking events are listed. The syntax is:
[ dtc [ board [ port ]]]
dtc Specifies the name of the DTC for which to list configuration information or
networking events. Use the same DTC name as you used when adding the
DTC using dtcconfig. A DTC name consists of up to 8 alphanumeric
characters, including hyphens (-) and underscores (_). The first character
must be alphabetic.
If you specify the DTC name without the board or port parameters, then
the display is a rear panel summary, a list of the CPU/LAN or LAN
parameters, and a list of the parameters of each configured port.
This parameter is optional.
board The board on the specified DTC. Although this value is optional, you can
specify it only if the dtc parameter is also specified.
If you specify a board name without the port parameter, the display is a
board summary and list of the parameters of each configured port (if it is not
the CPU/LAN or LAN board).
The board parameter is one of the following:
C or c CPU/LAN on a DTC 48 or DTC 16
L or l LAN on a DTC 72MX or DTC 16TN
B or b board of a DTC 16TN (a DTC 16TN has no separate
boards)
0 ... 5 board number for a DTC 48