HP Matrix Operating Environment 7.3 and 7.3 Update 1 Infrastructure Orchestration User Guide

1. In Matrix OE visualization, select Tools→ Logical Servers→Refresh.
2. In the Logical Server perspective, verify that the logical server no longer exists. If it exists,
delete it using Delete→Delete Logical Server.
3. Use the vCenter client to browse the ESX server's datastore.
4. Delete the VM, if it exists.
5. Browse to the ESX server's datastore.
6. Navigate to the directory and delete the offending directory and directory contents.
For Hyper-V:
1. In Matrix OE visualization, select Tools→ Logical Servers→Refresh.
2. In the Logical Server perspective, verify that the logical server no longer exists. If it exists,
delete it using Delete→Delete Logical Server.
3. Connect to the Hyper-V hypervisor.
4. Delete the VM from the Hyper-V Manager.
5. Navigate to the directory and delete the offending directory and directory contents.
If Server Automation (SA) deployment was used to provision the VMs:
1. Remove the ESX and/or Hyper-V VMs using the preceding steps.
2. Connect to the SA Core Server.
3. From the SA devices list (All Managed Servers), select the VMs.
4. Perform a deactivate and a delete.
Configuring storage pool entries, FC zones, and disk array presentations
The following procedure is the HP recommended approach for configuring storage pool entries,
FC zones, and disk array presentations.
236 Troubleshooting