HP Virtual Connect Manager Command Line Interface Version 3.00 User for Integrity BL8x0c i2 Server Blades Guide

Command line 19
Item Description
UserName (Required
for enclosures that
are not imported)
A valid user name of the Onboard Administrator user for the enclosure to be
imported.
Password (Required)
A valid OA user password for importing the enclosure. If no password is
given at the command line, the system interactively prompts the user for a
password during the import operation.
DoubleDense
(Optional)
If the enclosure being imported supports double-dense servers, then this
property enables the device bay display format to support a display for
double-dense servers. The default behavior is display for single-dense servers
in the enclosure.
Examples
->import enclosure UserName=Administrator
Password=fgg7h*1
Imports the local enclosure into the domain
->import enclosure UserName=Administrator
Password=fgg7h*1 DoubleDense=true
Imports the local enclosure with a double-dense device bay display format
-> import enclosure 192.168.0.120 UserName=MyOaUser
Password=dgfsfdsjd
Imports a remote enclosure into the domain
-> import enclosure
Imports the local enclosure that is already discovered
-> import enclosure 192.168.0.120
Imports a remote enclosure that is already discovered
Item Description
remove enclosure
Remove a remote enclosure that has been imported into the domain. The local
enclosure cannot be removed from the domain using the remove
enclosure
command.
Syntax
remove enclosure <EnclosureID | *>
Parameter
EnclosureID
(required)
The enclosure ID of the remote enclosure to be removed from the domain,
where "*" removes all the remote enclosures that exist in the domain. The
enclosure IDs can be identified for a particular enclosure by using the show
enclosure command. The local enclosure cannot be removed from the
domain with this command.
Examples
->remove enclosure encl
Removes a remote enclosure
->remove enclosure *
Removes all remote enclosures from the domain
Item Description
show enclosure
Display all enclosures in the domain.
Syntax
show enclosure [<EnclosureID>|*]
Parameter