HP Virtual Connect Manager Command Line Interface Version 3.00 User for Integrity BL8x0c i2 Server Blades Guide

Command line 92
Name RFC Description
of Class 2 frames transmitted out of
this port.
fcClass3Discards 4044
fcmPortClass3Discards - The number
of Class 3 frames that were
discarded upon reception at this
port.
fcClass3RxFrames 4044
fcmPortClass3RxFrames - The number
of Class 3 frames received at this
port.
fcClass3TxFrames 4044
fcmPortClass3TxFrames - The number
of Class 3 frames transmitted out of
this port.
fcDecodeErrors N/A
The number of errors while
converting the incoming 10-bit data
stream into an 8-bit data for
processing. Increasing value of this
counter indicates potential hardware
problem between module and FC
mezzanine serdes settings.
fcFBSYFrames 4044
fcmPortClass2RxFbsyFrames - The
number of times that F_BSY was
returned to this port as a result of a
Class 2 frame that could not be
delivered to the other end of the link.
This can occur when either the fabric
or the destination port is temporarily
busy. Note that this counter will
never increment for an F_Port.
fcFRJTFrames 4044
fcmPortClass2RxFrjtFrames - The
number of times that F_RJT was
returned to this port as a result of a
Class 2 frame that was rejected by
the fabric. Note that this counter will
never increment for an F_Port.
fcFramesTooLong 4044
fcmPortFrameTooLongs - The number
of frames received at this port for
which the frame length was greater
than what was agreed to in
FLOGI/PLOGI. This could be caused
by losing the end of frame delimiter
fcFramesTruncated 4044
fcmPortTruncatedFrames - The
number of frames received at this
port for which the frame length was
less than the minimum indicated by
the frame header - normally 24
bytes, but it could be more if the
DFCTL field indicates an optional
header should have been present.
fcInvalidCRC 4044
fcmPortInvalidCRCs - The number of
frames received with an invalid CRC.
This count is part of FC-PH's Link