DisplayMaker Legacy ColorMark+ - User Guide

3-2 Copying a Profile to Another Server or Workstation
Copying a Profile to
Another Server or
Workstation
Once you have created a ColorSpan (.CX) profile, you can begin
using it immediately on the server on which it was created.
ColorSpan profiles can also be copied between ColorSpan serv-
ers that are running the same version of the ColorMark+ soft-
ware.
To install an ICC profile on a client workstation, copy the file
from the server into the folder that is appropriate for your oper-
ating system. Some applications may require ICC profiles to be
installed in special locations. Refer to your application docu-
mentation for instructions.
ColorSpan print servers include a file transfer protocol (FTP)
server to help you transfer profiles between servers or worksta-
tions over your Ethernet local area network. Both the server and
the workstation must be properly configured to use this
method. For further technical information, refer to Appendix C,
Configuring TCP/IP.
Subsequent sections in this chapter show how to use color pro-
files in a ColorSpan workflow and an ICC workflow.
General FTP Instructions 1. Launch your FTP client software (such as a web browser or
specialized FTP client) or operating system command line.
2. Open the FTP server on the ColorSpan print server by
entering the server’s IP address (preceded by “ftp://” if
required by your FTP software).
3. When the server responds with a user name prompt, enter
“anonymous.”
4. When the server responds with a password prompt, enter
“anonymous.”
5. When the FTP directory is displayed, navigate to the sub-
directory that corresponds to the printer you are using.
From this point you can download (“get”) individual color
profiles to your workstation, and upload (“put”) them from
your workstation to the server.