DisplayMaker Legacy ColorMark+ - User Guide

3-4 ColorSpan Workflow
◆ From the Manage Profiles dialog box, you can view the pro-
files that apply to the current printer, and reset the calibration
data for any profile. If you select a profile here and click
Default, the sof tware asks you whether you want to apply the
profile to all ports routed to the printer. If not, no changes are
made.
◆ The Document Details dialog box opened from the Tracking
Log shows the profile that was applied to the completed
print job.
The server software verifies that the profile you specified for a
print job is compatible with the ink and media loaded in the
printer. It does this by reading the ink profilers installed in the
printer, and checking the media specified in the Printer Configu-
ration dialog box. If there is a mismatch, the job is sent to the
Attention Queue. If this happens, either change the profile to
match the media and ink loaded in the printer, or change the
media and ink loaded in the printer to match the profile applied
in the print job.
Calibrate the new profile if it produces inaccurate color.
Fig. 3-2. Manage Profiles
Click Reset to reset calibration
data for the highlighted profile
Click to delete (only if created with
ColorMark+ 2.0 or later)