HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

DescriptionStatusParameter name
Port name of the storage system
Specify this parameter to acquire information about a particular
path. When you specify this parameter, you must also specify the
model and serialnum parameters, either the
domainnickname or domain parameter, and the devnum
parameter.
Do not specify this parameter together with the port parameter.
If they are specified at the same time, an error will occur.
Optional
portname
Port ID of the storage system
Specify this parameter to acquire information about a particular
path. When you specify this parameter, you must also specify the
model and serialnum parameters, either the
domainnickname or domain parameter, and the devnum
parameter.
Do not specify this parameter together with the portname
parameter. If they are specified at the same time, an error will
occur.
Optional
port
Nickname of the host storage domain
Specify this parameter to acquire information about a particular
path. When you specify this parameter, you must also specify the
model and serialnum parameters, either the portname or
port parameter and the devnum parameter.
Do not specify this parameter together with the domain
parameter. If they are specified at the same time, an error will
occur.
Optional
domainnickname
Domain ID of the host storage domain
Specify this parameter to acquire information about a particular
path. You can specify a decimal or hexadecimal value. When
you specify this parameter, you must also specify the model and
serialnum parameters, either the portname or port
parameter, and the devnum parameter.
Do not specify this parameter together with the domainnickname
parameter. If they are specified at the same time, an error will
occur.
Optional
domain
Device number of the logical unit
Specify this parameter to acquire information about a particular
path. This parameter can be specified in decimal, and in
colon-separated hexadecimal. If you specify a hexadecimal
number, for XP12000/XP10000/SVS200 and XP1024/XP128,
use the xx:yy format, where xx is the CU number and yy is the
LDEV number. For P9500 and XP24000/XP20000, use the
ww:xx:yy format, where ww is the LDKC number, xx is the CU
number, and yy is the LDEV number. ww is optional. If you omit
ww, the LDKC number is regarded as 0.
When you specify this parameter, you must also specify the
model and serialnum parameters, either the portname or
port parameter, and either the domainnickname or domain
parameter.
Optional
devnum
Command reference154