HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

DescriptionStatusParameter name
ID of the host that recognizes the secondary volume (S-VOL)
If you are using method 2 or 3, you must specify this parameter.
If the replicationgroupid parameter is specified, this
parameter is ignored.
Optional
svolhostid
Number of the HORCM instance that manages the S-VOL
If you are using method 2, you must specify this parameter.
If the replicationgroupid parameter is specified, this
parameter is ignored.
Optional
svolinstan-
cenum
Port number of the HORCM instance that manages the S-VOL
Depending on the host OS, specify the appropriate value:
• Solaris systems: Specify an integer in the range 0-65535.
• For AIX, Windows, HP-UX, or Linux systems: Specify an integer
in the range from 1-65535.
If you are using method 3, you must specify this parameter.
If the replicationgroupid or svolinstancenum parameter
is specified, this parameter is ignored.
Optional
svolportnum
Model of the storage system that contains the P-VOLRequired
pvolarraytype
Serial number of the storage system that contains the P-VOLRequired
pvolserialnum
Device number of the P-VOL
This parameter can be specified in decimal, and in
colon-separated hexadecimal. If you specify a hexadecimal
number, for XP12000/XP10000/SVS200, use the xx:yy format,
where xx is the CU number, and yy is the LDEV number. For
P9500 and XP24000/XP20000, use the ww:xx:yy format,
where ww is the LDKC number, xx is the CU number, and yy is
the LDEV number. ww is optional. If you omit ww, the LDKC number
is regarded as 0.
The execution results are output in decimal.
Required
pvoldevnum
Port ID in the HORCM configuration file that manages the P-VOL
paths
If you specify this parameter, specify either pvolportid or
pvolportname. Do not specify both parameters at the same
time. If they are specified at the same time, an error will occur.
Optional
pvolportid
Port name in the HORCM configuration file managing the P-VOL
path
If you specify this parameter, specify either pvolportid or
pvolportname. Do not specify both parameters at the same
time. If they are specified at the same time, an error will occur.
Optional
pvolportname
Command reference280