User Manual

11
PER GEAR SHIFT POINTS: Use the buttons to the right of the screen to scroll up or down,
and highlight the gear change to adjust.
Press the ‘Select’ button, then use the buttons to the right of the screen to scroll up or down, and
highlight the value to increase or decrease the shift points, in 100 RPM increments. Press Select
to save the chosen value.
Press the ‘Back’ button to go back to the Gear Shift menu. Repeat the procedure above for each
gear change. Once you have made the desired changes for each gear, press the ‘Back’ button to
return to the Tuning Menu. For more information on Shift Points options, see Programming
Features explanation in section 4.
SHIFT FIRMNESS (Most Automatic Transmission Equipped Gas Vehicles)
Use the buttons to the right of the screen to highlight Shift Firmness. Press the ‘Select’ button to adjust
the firmness at which the transmission shifts.
Some vehicles have only one pre-determined setting for shift firmness, and will not have a selectable
adjustment. If your vehicle has this setting, the programmer will display a Yes or No option. Highlight
the desired choice, and press ‘Select’. Some vehicles have the option to select between 25%, 50%, 75%,
and 100% for the level in which to enhance shifting firmness.
To adjust the shift firmness in all gears the same, select ALL from the Shift Points menu. To adjust the
shift firmness for each gear change separately, select PER GEAR from the Shift Points menu.