- Multi-Tech Broadband Router User Guide

Chapter 6 – RouteFinder Monitor
RouteFinder RF500S User Guide 107
RouteFinder Monitor Status Tab
The Status tab provides status information about of the WAN Ethernet and Async ports.
How to Access This Screen
1. From the RouteFinder Monitor main screen, click the
Status tab.
2. The
Status tab displays the status for each port.
WAN Ethernet
This indicator light shows which function is in use: IP Routing or Remote Access.
Async Port
Modem Power - The indicator light is lit when the modem power is turned on.
Modem Ready - The Network Device sends a pre-initialization and initialization
command to the modem or ISDN TA. If this communication is successful, the indicator
light will be lit, indicating your modem is ready to make a connection.
Modem Connected - If the Network Device has detected that your modem has
successfully dialed up a connection to a remote site, the indicator light will be lit.
PPP Connected - After a connection is established, if the RouteFinder has detected that
the PPP connection is successful, this indicator light will be lit.