User guide

Chapter 13 Creating Your Arrangement 337
2 Choose Region > Tie Regions by Position Change (or use the Tie Regions by Position
Change key command).
The first region remains unchanged, and all subsequent regions are moved to the left.
Note: You can use this feature to speed up the playback of spoken word recordings
that have been processed with strip silence (by closing the gaps between words).
To remove a section of your arrangement, using the locators:
1 Set the locators to span the section you want to remove (bar 5 to 8, for example).
2 To cut all regions that fall between the locators: Click the Cut Section button in the
Arrange Toolbar, or use the Region > Cut/Insert Time > Snip: Cut Section Between
Locators (or corresponding key command).
3 To cut selected regions that fall between the locators: Choose Region > Cut/Insert
Time > Snip: Cut Section Between Locators (or use the corresponding key command).
Any regions that span the cycle area (as an example, a 16 bar long region that starts at
bar 1, and ends at the start of bar 17) are cut.
The section between the locators (bars 5 to 8) is deleted from all selected regions (in
fact, it is copied to the Clipboard and removed from the arrangement).
All regions to the right of the right locator are moved to the left by the length of the
cycle (4 bars). This includes newly-created regions that result from the operation.