Manual

Introduction
3
Record Backup
Support record to be backed up through USB (U disk, mobile HDD)
interface
Support record to be backed up by time/event/image searching
Support record cutting for backing up when playing back
Support a maximum of 10 backup tasks in background and backup status
viewing
Alarm Management
Support alarm schedule setting
Support enabling or disabling of the motion detection, external sensor
alarm input, intelligence alarm and exception alarms including IP address
conflict alarm, disk IO error alarm, disk full alarm, no disk alarm, illegal access
alarm, network disconnection alarm, IPC oine alarm and so on, alarm trigger
configuration supportable
Support IPC oine alarm trigger configuration of PTZ, snap, pop-up
video, etc.
Support event notification modes of alarm-out, pop-up video, pop-up
message box, buzzer, e-mail and so on viewing
The snapped images can be attached into the e-mail when alarm linkage
is triggered
Support alarm status view of alarm-in, alarm-out, motion detection and
exception alarm
Support alarm to be triggered and cleared manually
Support system auto reboot when exception happens
Network Functions
Support TCP/IP and PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP protocol
and so on
Support black and white list function and the black and white IP
address/IP segment/MAC address can be set
Support multiple browsers including IE8/9/10/11, Firefox, Opera, Chrome
(available only for the versions lower than 45) and Safari in MAC system
Support remote achievement, configuration, import and export of the
DVR parameters and other system maintenance operations including remote
upgrading and system restart
Support remote camera configuration of the DVR including video
parameters, image quality and so on
Support remote searching, playback and backup of the DVR
Support manual alarm to be triggered and cleared remotely
The auto-focusing camera can be adjusted through web client (support
zoom in/out, but one key focus is not currently supported)
Support NVMS or other platform management software to access the
DVR and manage it
Support NAT function and QRCode scanning by mobile phone and tablet
Support mobile surveillance by phones or tablets with iOS or Android OS
Support DVR to be accessed remotely through telnet and the telnet
function can be enabled or disabled
If one camera recording is enabled or disabled manually through web