Configuration Guide User guide

1514 FastIron Configuration Guide
53-1002494-02
Displaying IGMP snooping information
group: 224.4.4.4, life = 260
3/1/4 has 1 groups,
This interface is non-Querier (passive)
Querier is 8.8.8.8
Age is 0
Max response time is 100
default V2
**** Warning! has V3 (age=0) nbrs
group: 236.6.6.6, life = 260
Clear IGMP snooping commands
The clear IGMP snooping commands must be used only in troubleshooting conditions, or to recover
from errors.
Clear ing IGMP counters on VLANs
To clear IGMP snooping on error and traffic counters for all VLANs, enter the clear ip multicast
counters command.
Brocade# clear ip multicast counters
Syntax: clear ip multicast counters
Clearing IGMP mcache
To clear the mcache on all VLANs, enter the clear ip multicast mcache command.
Brocade# clear ip multicast mcache
Syntax: clear ip multicast mcache
Clearing mcache on a specific VLAN
To clear the mcache on a specific VLAN, enter the clear ip multicast vlan <vlan-id> mcache
command.
Brocade# clear ip multicast vlan 10 mcache
Syntax: clear ip multicast vlan <vlan-id> mcache
The <vlan-id> parameter specifies the specific VLAN in which to clear the mcache.
Clearing traffic on a specific VLAN
To clear the traffic counters on a specific VLAN, enter the clear ip multicast vlan <vlan-id> traffic
command.
Brocade# clear ip multicast vlan 10 traffic
Syntax: clear ip multicast vlan <vlan-id> traffic
The <vlan-id> parameter specifies the specific VLAN in which to clear the traffic counters.