Reference Guide

1775
Missing MIDI Ports dialog
Bus Output. Specify the desired output for the new bus. The drop-down list shows all available
output destinations.
See:
“To insert a send to an existing bus” on page 847
“To insert a send to a new stereo bus” on page 848
“To insert a send to a new surround bus” on page 848
“To insert a send to a new effect bus” on page 848
“To insert a send on multiple tracks simultaneously” on page 849
Missing MIDI Ports dialog
If any assigned MIDI output devices are missing when you load a project, which is likely to happen if
you transfer projects between different computers, the Missing MIDI Ports dialog box appears.
The Missing MIDI Ports dialog box lets you remap missing output ports to available output ports.
Silent Buses Detected dialog
When you load a project, SONAR checks to see if the exact same output ports are assigned as
when the project was saved. SONAR’s port assignments can change if you load the project on a
different hardware configuration or change driver models. If there is any discrepancy between the
port assignments that were saved and the ports that are used in the current configuration, the ports
are set to “None” and the Silent Buses Detected dialog box displays all track and bus outputs from
the current project that have been assigned to a silent output.
The Silent Buses Detected dialog box also appears if any track or bus output is assigned to “None”
as a result of changing the audio configuration.
Note: If you do not remap a missing device, the track’s Output control will display MISSING:
<name of missing device>. If the missing device becomes available in the future, the track will
automatically be assigned to the correct device.