Reference Guide

214 Controlling playback
Changing track settings
selected track.
• To adjust the same control in all selected tracks of the same type, hold down the CTRL key and
adjust a control in any selected channel strip.
For example, to assign a group of tracks to the same output, select the tracks you want to assign,
then hold down the CTRL key and assign the Output control in any selected track. All selected tracks
will be assigned to the same output.
All track parameters are saved with a SONAR project. However, if you export a project to a standard
MIDI File, several of the parameters (Key+, Vel+, Time+, and Chan) are applied to the MIDI data as
the file is being exported. Other parameters, including Input, Output, Mute, Solo, and Archive, are
lost when you export the project to a MIDI file.The following sections contain more information about
many of the parameters in the Track view. For more information about the track inputs and the track
Arm button, see “Preparing to record” on page 260.
Setting up output devices
The output setting for a track determines which piece of hardware or software synthesizer will be
used to produce the sound stored in your project. In a very simple equipment setup, you might have
only a computer equipped with a basic sound card. In this case, you want to play all MIDI and audio
output through the sound card on your computer.
If your equipment setup also includes a MIDI keyboard attached to the MIDI port on your sound card,
you can choose to route MIDI data directly to the sound card or through the sound card MIDI port to
the keyboard. If you choose the former, the music will play from your computer speakers. If you
choose the latter, the sound will play from the speaker attached to your keyboard. You can even
choose to send some MIDI information to each of these devices so that they both play at once.
You can purchase MIDI interfaces that plug into your parallel, serial, or USB port to add MIDI ports to
your computer. For more information about complex system configurations, see the online Help topic
“Hardware setup” on page 1273.
If your computer has several MIDI outs, select Edit > Preferences > MIDI - Devices and put them
in the desired order. The order in which your MIDI devices appear in the Output menus in the Track
and Console views is based solely on the order in which the selected outs appear in Edit >
Preferences > MIDI - Devices. As a result, the order in which your devices appear in a track’s
output control may not match the port numbers that appear on your external multiport MIDI device.