Reference Guide

913
Applying audio effects
Mixing
Applying audio effects
You can destructively apply audio effects for one or more tracks. When you are pleased with the
audio effects you have patched into a track, you can apply the effects to the track. Applying effects to
a track saves resources, allowing you to include additional tracks and/or effects
To apply multiple audio effects offline
1. Add one or more audio effects to one or more tracks in either the Track view, Track Inspector or
the Console view.
2. In the Track view, select the tracks or clips you want to be affected.
3. Select Process > Apply Effect > Audio Effects.
The Apply Audio Effects dialog box appears.
4. If desired, select the option to delete the effects after applying them.
5. Click OK.
If you do not delete the effects after applying them, they remain active.
CPU usage of audio effects
The number of real-time audio effects that your computer can handle depends on the number of
audio tracks in your project, the number and type of effects you want to use, and the type and speed
of your CPU. Certain effects are more CPU-intensive than others, and enabling certain settings
(such as using equalization within the Stereo Reverb) increases CPU usage for those effects.
Applying MIDI effects
You can destructively apply the MIDI effects in a track’s patch point. This makes it easy for you to
experiment with MIDI effects before you commit to them on a more permanent basis.
To apply MIDI effects destructively
1. In the Track view, select the tracks or clips to be affected.
2. Select Process > Apply Effect > MIDI Effects.
3. If desired, select the option to delete the effects after applying them.
4. Click OK.
If you don’t delete effects after applying them, they continue to be active during playback, even
though they have already been applied.
Note: When applied effects are undone, they are not re-patched in the effects bin(s).