Reference Guide

970 ProChannel (Producer only)
To lock ProChannel in the Inspector pane
By default, the Track Inspector dynamically updates to show the current track. However, you can
choose to always show a specific instance of ProChannel regardless of which track is current.
1. Click the track or bus you want to show in the Track Inspector.
2. Click the ProCh button at the top of the Inspector.
ProChannel is displayed in the Inspector pane.
3. Click the Track Name control at the bottom of the Inspector and select Lock the current track
or bus from the drop-down menu.
To unlock the track or bus, select Lock the current track or bus from the menu again.
Keyboard navigation
When ProChannel has focus, you can use the following keys to navigate around ProChannel:
ProChannel compatibility with SONAR X2 Studio and Essential
ProChannel is only included with SONAR X2 Producer. If a project was created in Producer and
loaded into Studio or Essential, the project might sound different because ProChannel is not
available. However, if you resave the project in Studio or Essential, all ProChannel settings will be
persisted and available if you later load the project into Producer again.
Loading legacy projects
If you load a pre-SONAR X2 project that uses the per-channel Sonitus:fx EQ, the ProChannel
QuadCurve Equalizer module will be disabled.
If you want to keep and edit the Sonitus:fx EQ, double-click the small Equalizer graph in the
collapsed ProChannel.
To replace the Sonitus:fx EQ with the ProChannel QuadCurve Equalizer, do one of the following:
• Press CTRL and click the Equalizer enable/disable button .
• Enable the Equalizer module. SONAR prompts if you want to switch from the Sonitus:fx EQ to the
ProChannel QuadCurve Equalizer.
Key Action
PAGE UP Scroll up
PAGE DOWN Scroll down
HOME Go to top
END Go to bottom
Table 175. ProChannel keyboard shortcuts