Manual Chapter 1

2-27
UltraSpec Analyzer Utility Functions
Communications Trouble (using Modem)
If communications cannot be established, verify the following:
1.····The modem command string in the Set Modem Commands menu of
the analyzer.
2. ···The baud rate, stop bits, timeout parameters, and the date and time
on the analyzer and the host computer.
3. ···Secure connections on the Model 705, the analyzer, and the
telephone line.
4. ···Secure connections on the host computer and modem, and the
telephone line.
5. ···A dial tone is present, the modem dials the number, the destination
phone rings, and the destination modem answers.
System Setup
From the Utility Functions menu, press System Setup to access the fol-
lowing screen. This screen shows setup parameters from which various
operational control parameters of the analyzer may be specified.
9