Manual Chapter 5

5-49

Machine Moves

If a live move is done in the vertical direction, if you go directly to the Hor-

izontal Move screen (or visa versa) and press the Insert key to start the Live

Mode, the following message will be displayed.

Once a live move is done in either the vertical or horizontal direction, a

second live move should not be done in the opposite direction without ﬁrst

acquiring a new set of laser readings.

If this situation occurs, press the Reset/Main key to abort the Live mode

and return to the Main menu or press Enter to continue with the Live

mode.

Note

This message is also displayed on a recalled alignment job if a

new set of data has not been acquired since the job was

recalled.