User`s guide

i.LON SmartServer Power Line Repeating Network Management Guide 95
7. Copy the template from the location where it was saved in step 5 to the
root/config/template/lonworks directory on the SmartServer flash disk.
Creating an SmartServer Device from a Template
After you create a SmartServer device template, you can use it to configure another SmartServer. The
new SmartServer device is created with the same general and/or driver properties as the template. You
can then further configure the SmartServer device to meet the needs of the network and even create a
new template that has a more specific configuration of that SmartServer.
To create a SmartServer device from a template, follow these steps:
1. Right-click the channel on which the new SmartServer device is to be attached and then click Add
Device in the shortcut menu.
2. The Add Device dialog opens
3. Enter a descriptive name for the SmartServer device such as “i.LON App (Custom: StreetLight
Scheduler) ”.
4. Expand the Template folder to show all the folders in the root/config/template directory on the
SmartServer flash disk. Expand the folder containing the template to be used to create the
SmartServer device and then click that template.