Technical data

EQ Gain Low

For this measurement the center frequency was set to 1.8 kHz and the EQ gain controller was set

to dierent positions between 0 and full left (-3 dB). The diagram shows the eectiveness of the l-

ter: The lower frequencies are boosted up to 3 dB, at the center frequency they cross zero, and the

higher frequencies are cut up to 4.5 dB. Depending on the setting of the EQ gain the level might

need some make up with the gain controller.

EQ Gain High

Now let’s have a look at the opposite scenario. In this gure the EQ gain controller was turned

from 0 to full right at a center frequency of 1.1 kHz. Contrary to the previous example, the high

frequencies are now boosted up to 3 dB and the lower frequencies are reduced by up to 5 dB. The

ne-tuned interim values make it possible to apply very subtle sonic changes.

REFERENCE – EQ Gain Low & EQ Gain High

REFERENCE