SuperStack II Advanced RPS Management Module User Guide

2
I
NSTALLATION
This chapter describes the SuperStack
®
II Advanced RPS
Management Module and how to install the module in the
SuperStack II Advanced RPS.
The SuperStack II Advanced RPS Management Module
The Management Module plugs directly into your SuperStack II
Advanced RPS chassis.
The Management Module connects to an Ethernet network with a
10BASE-T cable having an RJ-45 connector.
The module contains a full SNMP agent that implements the
relevant portions of MIB II and private extensions for more control.
New versions of the agent may be loaded onto the module as they
become available.
WARNING: The RJ-45 connector is a data socket. Only data cables
should be connected to it. Do not connect telephone outlets to
these connectors
.
AVERTISSEMENT: Le connecteur RJ-45 est une prise de donnèes.
Seuls des câbles de dennèes devraient y être connectès. Ne reliez
pas de prises tèlèphoniques à ces connecteurs.
WARNUNG: Bei dem Anschluß RJ-45 handelt es sich um eine
Datenbuchse, an die ausschließlich Datenleitungen angeschlossen
werden dürfen. Schließen Sie keine Telefonanschlüsse an diese
Buchsen an.