Getting Started with Stac Replica Backup

Chapter 3 Installing Replica
7
If you already have the Windows NT drivers on diskette, skip to the section,
"Adding a T4 Device Driver."
Creating a Drivers Diskette
If you don't have an HP NetServer Windows NT drivers diskette, you need to
create one before you can install the T4 driver for use with Windows NT 3.51.
To create the drivers diskette:
1. Boot the HP NetServer from the HP NetServer Navigator CD-ROM.
2. Click the NetServer Utilities button, then click Diskette Library and select
the NOS Drivers-Windows NT 3.51 option.
3. Follow the on-screen instructions for placing the drivers on a diskette.
Adding a T4 Device Driver
When a device drivers diskette is available, you can install the T4 device driver
that Replica requires for operations.
To add the T4 device driver:
1. Reboot the HP NetServer from the installed operating system.
2. Open the Main folder and double-click the Windows NT Setup icon.
3. Choose Add/Remove Tape Devices from the Options pull-down menu.
4. Click the Add button.
The Select Tape Device Options screen displays a list of available devices.
5. Choose Other from the list and press Enter.
The Insert Disk window appears, prompting you for the disk containing
the required driver.
6. Insert the appropriate drivers disk into drive A, then enter the pathname
A:\T4i in the entry field, and click OK.
The Select OEM Option screen appears, listing the driver(s) provided on
the disk.
7. From the list, choose the HP Colorado T4000 driver, and click OK.
8. Click the Install button to begin the driver installation.
A dialog box appears, asking you to confirm the source directory of
the driver.