Getting Started with Stac Replica Backup

Chapter 4 Configuring An Automatic Backup

Follow these instructions to create a default configuration for automatic backup

of an HP NetServer running Windows NT. For an HP NetServer running

NetWare, skip to the "Creating a Backup Configuration (NetWare)" section later

in this chapter.

1. Insert a blank tape cartridge in the HP SureStore T4 tape drive.

2. From the desktop or Start menu, open the Configuration Wizard

shortcut.

The Wizard starts and displays a welcome screen.

3. Click Next to go to the Tape Drive Selection window where you identify

the tape drive you'll be using for backups.

Figure 4-1. Tape Drive Selection Window

IMPORTANT In the Tape Drive Selection window, the HP SureStore T4 tape

drive is identified as an HP T4000s drive. Only SureStore

drives with the T4000 designation will work with Replica.

4. Choose a tape drive from the menu of available tape drives, then click

Next.

NOTE If the tape in the selected drive contains data from a previous

Replica backup, the Wizard asks you to confirm the

overwriting of the data based upon the new configuration.