HP Netserver LXr Pro8 User Guide

Chapter 10 Information Assistant
84
Installing from the CD-ROM
To install HP Information Assistant from the HP NetServer Navigator CD-ROM,
perform the following steps:
1. Turn on your computer and CD-ROM drive.
2. Run Windows and display the Program Manager.
3. Insert the HP NetServer Navigator CD-ROM into the CD-ROM drive.
4. From Program Manager, select the File menu and choose "Run."
5. At the command prompt, type the following:
{drive}:\infoasst\setup /a
where {drive} is the letter of the CD-ROM drive.
6. Follow the instructions that appear on your screen.
In Program Manager, the Setup Program creates a new program group called HP
NetServer Information Assistant, with an icon for running the application.
Installing from the Network
To install the HP NetServer Information Assistant from a network, you must first
install the run-time files onto a network hard disk from the CD-ROM, and then
run setup on the client PC.
If you plan to let multiple users run the HP NetServer Information Assistant from
the network, it is advisable to copy the data files to the network.
Installing the Application Files onto the Network
To install the HP NetServer Information Assistant onto the network, perform
the following steps:
1. Run Windows as you normally would, and display the Program Manager.
2. Insert the HP NetServer Information Assistant CD-ROM into the
CD-ROM drive.
3. From Program Manager, select the File menu and choose Run.
4. At the command prompt, type the following:
{drive}:\infoasst\setup /a
where {drive} is the letter of the CD-ROM drive.