HP NetRAID DIMM Installation Guide

12
8. Insert the new DIMM carefully into the socket. The retaining
clips will close automatically if it is inserted properly.
CAUTION Do not rock the DIMM into place, but apply firm
and even pressure directly downward. If the
retaining clips do not close, remove the module and
repeat Steps 5 through 8.
E. Reconnecting the BBM
If a BBM is installed, plug its cable in by reversing the action shown in
Figure 2.
F. Replacing Cover 1
CAUTION Replace all covers before operating the HP NetServer
for more than 60 minutes. Otherwise, damage to
system components may result from insufficient
airflow cooling.
Replace Cover 1, as described in the HP NetServer installation guide.
If the HP NetServer is installed in a rack enclosure, slide it into the rack
and secure it. See your rack documentation and the HP NetServer
installation guide for more information.