OSI/FTAM Programming Reference Manual

FTM Procedures
HP NonStop OSI/FTAM Programming Reference Manual—528611-001
4-118
FTM_OPEN_CNF_
include one or more informative messages. A value of ZFTM-VAL-ACTION-
FAILURE indicates that the operation was not successful, and diagnostic is
likely to contain one or more diagnostic messages.
action-result is an optional parameter.
contents-type output
INT.EXT:ref:(ZFTM-DDL-CNTNTS-TYPE)
returns the document type with appropriate parameters. If you supply a value of
ZFTM-VAL-CNTNTSTYPE-UNKNOWN for contents-type in the
FTM_OPEN_REQ_ call, the responder returns the actual contents-type
information. For a full description of contents-type and its usage, see the
OSI/FTAM Programming Guide.
Supported document types and their associated object identifiers include the
following:
contents-type is an optional parameter.
diagnostic output
INT .EXT:ref:(ZFTM-DDL-DIAGNOSTIC)
provides information that qualifies the success or explains the failure of a
requested action. For a complete list of possible diagnostic values, see
Appendix C, ISO FTAM Diagnostic Messages. The initiator can also return the
informative diagnostic message ZFTM-DIAG-CNTNTS-TYPE-SIMPLE (5037) on
this call. For more information on this diagnostic message, see Appendix D,
NonStop FTAM Initiator Diagnostic Messages.
diagnostic is an optional parameter.
Considerations
•
To complete this procedure call successfully, the association must be in the file-
selection regime.
•
Before calling FTM_OPEN_CNF_, you must call the following procedures:
FTM_OPEN_REQ_
APS_EVENT_RECEIVE_
APS_STATUS_
Document Type Object Identifier
FTAM-1 { 1 0 8571 5 1 }
FTAM-2 { 1 0 8571 5 2 }
FTAM-3 { 1 0 8571 5 3 }
NBS-9 { 1 3 14 5 5 9 }