HP MicroServer Remote Access Card User Manual

13
8. Press the F10 key to save and exit RBSU.
9. With IP address, use SSH to log in to the remote management CLP, or use a web browser to
access the HTML interface.
Logging in to BMC Web for the first time
BMC is configured with a default user name and password.
1. BMC is connected to the network through a NIC port (RJ45) on the Remote Access Card. If you
want to access BMC via LAN, you need to connect the BMC LAN port and the switch via a
network cable.
2. Get “BMC LAN configuration” from the RBSU
3. Use these values to access BMC remotely from a network client using a standard Web browser
via the IP address of BMC.