HP DDS/DAT drives UNIX, Linux and OpenVMS configuration guide (DW049-90915, November 2009)

HP (HP-UX) servers and workstations14
2. From the SMH Tools page (see Figure 3), select Modules from the Kernel Configuration section.
Figure 3 SMH web-based interface (HP-UX11i v3)
3. In the Search box on the Kernel Configuration page, type
stape and execute the search.
The search results list will include both
estape and stape modules. If either of these modules is
not installed both Current State and Next Boot State will be shown as “unused”. A state of
“static” indicates that the module is installed.
4. Select the
estape module
1
radio button. Its details will appear in a panel below the modules
list. From the right hand panel on the web page, click the Modify Module link.
1. T h e estape and stape modules are linked, so it is sufficient to select the estape module alone for installation.