HP DDS/DAT drives UNIX, Linux and OpenVMS configuration guide (DW049-90915, November 2009)

HP (HP-UX) servers and workstations18
For example, using values from the ls -al output above and a LUN of 1, you would execute:
mknod /dev/rac/c4t5d1 c 203 0x045100
To verify that the autoloader has installed correctly, run the following mc command:
mc -p /dev/rac/<device_file> -rIDSM
This will display the various elements in the autoloader.
This will display the various elements in the autoloader. For more details of the
mc command, run
man mc.
What next?
Once the device files have been created, you should confirm that your new tape drive is working
properly. Chapter 8, “Verifying the installation” provides instructions on backing up and restoring a
sample file to test your installation.