HP StorageWorks Disk Array XP operating system configuration guide for Tru64 UNIX XP24000, XP12000, XP10000, v01 (A5951-96066, June 2007)
[5] UDID:181 WWID:01000010:6006-0e80-0350-6200-0009-0010-5062-00b5 (ev:none)
[6] UDID:182 WWID:01000010:6006-0e80-0350-6200-0009-0010-5062-00b6 (ev:none)
[7] UDID:183 WWID:01000010:6006-0e80-0350-6200-0009-0010-5062-00b7 (ev:none)
[8] UDID:184 WWID:01000010:6006-0e80-0350-6200-0009-0010-5062-00b8 (ev:none)
[9] UDID:185 WWID:01000010:6006-0e80-0350-6200-0009-0010-5062-00b9 (ev:none)
[10] UDID:186 WWID:01000010:6006-0e80-0350-6200-0009-0010-5062-00ba (ev:none)
2. Set the disk you installed the boot file system on:
P00>wwidmgr -quickset -item 2 -unit 1
Disk assignment and reachability after next initialization:
6006-0e80-0350-6200-0009-0010-5062-00b2
via adapter: via fc nport: connected:
dga1.1001.0.4.1 pga0.0.0.4.1 5006-0e80-0350-6211 Yes
dgb1.1001.0.3.0 pgb0.0.0.3.0 5006-0e80-0350-6211 Yes
3. Initialize the system
P00>init
4. Show devices
P00>show dev d
dga1.1001.0.4.1 $1$DGA1 HP OPEN-V 2114
dgb1.1001.0.3.0 $1$DGA1 HP OPEN-V 2114
dka0.0.0.2004.0 DKA0 COMPAQ BF01863644 3B05
dka500.5.0.2004.0 DKA500 COMPAQ BF01863644 3B05
dqa0.0.0.15.0 DQA0 Compaq CRD-8402B 1.03
dva0.0.0.1000.0 DVA0
The list of adapters is displayed, showing fabric topology.
5. Set the Boot default device.
P00>set bootdef_dev dga1.1001.0.4.1,dgb1.1001.0.3.0
6. Boot the system
P00>boot
Configuring system files
Configure the Tru64 system to recognize the HBA as explained in the Tru64 Installation Guide or
New Hardware Delivery (NHD) kit. This consists of booting genvmunix and executing doconfig (as
explained in the Installation Guide). This can also be done by editing the system kernel configuration
file as explained below.
1. Use the doconfig -cconfig_file command to reconfigure the kernel, where config_file
is usually the system name.
2. When you add a new HBA after an HBA of the same type has already been installed, a simple
reboot causes the host to recognize the new HBA. No rebuilding or reconfiguration is required.
Installing and configuring Tru64 for the XP disk array18