User`s guide

setxpcenv
14-92
MaxModelSize
Values are '1MB', '4MB', and '16MB'.
From the xPC Target Explorer window
Maximum model size list, select either 1 MB, 4
MB
, or 16 MB.
Choosing the maximum model size reserves the
specified amount of memory on the target PC for
the target application. The remaining memory
is used by the kernel and by the heap for data
logging.
Selecting too high a value leaves less memory
for data logging. Selecting too low a value does
not reserve enough memory for the target
application and creates an error.
HostTargetComm
Values are 'RS232' and 'TcpIp'.
From the xPC Target Explorer window
Host
target communication
list, select either RS232
or
TCP/IP.
If you select
RS232, you also need to set the
property
RS232HostPort. If you select TCP/IP,
then you also need to set all properties that
start with
TcpIp.
RS232HostPort
Values are 'COM1' and 'COM2'.
From the xPC Target Explorer window
Host
port
list, select either COM1 or COM2 for the
connection on the host computer. xPC Target
automatically determines the COM port on the
target PC.
Before you can select an RS-232 port, you need
to set the
HostTargetComm property to RS232.
Environment Property Description