Installation guide

Printer Setup Chapter 4-3
Figure 4-1 Select printer make and model
On the Manufacturer/Printer screen, each printer’s instal-
lation status is indicated by one of the following icons:
Driver is installed on the system and is available for
use with the label design software.
Driver is supported by the label design software, but
is not currently installed. (In most cases the driver can
be downloaded from the Web free of charge using the
Driver Service Pack utility.)
If you do not see your printer manufacturer and model in
the list of available printers, you have several options:
• Your printer may use a Windows printer driver that is
not supplied with the label design software. If so, you
can install it through Windows Control Panel.
• Your printer may be the same as one of the printers
listed, but it may have a different name. Your printer
vendor may be able to suggest alternative printers for
which the driver would be compatible.
• An existing driver may support your printer through
emulation. Your printer vendor may help you deter-
mine if a driver emulates your particular printer.
Note
The Have Disk button allows you to install a printer driver
from a disk or CD.