User's Manual

10
8. FM RADIO
Turning on the radio Press “on” for 2 times.
Turning off the radio Press “on” for 2 times.
New station automatic search Press “” and keep it pressed for 2 seconds.
Pre-setting a radio station (max. 6
stations)
Press “” and keep it pressed for 4 seconds.
Changing radio stations (among
the pre-set ones)
Press “” and keep it pressed for 2 seconds.
This function can also be turned on through PC using the “N-Com Wizard” programme
or through the “N-Com App” for Smartphone Android or iOS.
9. RIDER-PASSENGER INTERCOM
9.1. Rider-Passenger intercom pair up
 Set both A and B helmets in Setting Mode (Press “BACK” and keep it pressed for 4 seconds,
until the red LED start to flash quickly);
 On A helmet, press “n” briefly (Channel 1 pair up);
9.2. Rider-Passenger intercom function
After carrying out the proper pair up procedure, turn on the two helmets. Intercom connection will be
established automatically (this will take a few seconds. Wait until you hear the vocal confirmation
message).
If automatic connection is not possible, proceed with the manual connection.
Manual intercom activation With M5 turned on, briefly press “n”.
Manual intercom deactivation With M5 turned on, briefly press “n”.
10. BIKE TO BIKE INTERCOM
The N-Com system is used for bike-to-bike communication up to a distance of about 500 m (open
terrain, no obstacles).
The M5 system is provide with a default command combination and with a “FRIENDS” set of commands.
The “FRIENDS” set of commands can be activate with the N-Com Wizard or with the smartphone App
The “FRIENDS” set of commands allow the connection with up to 6 diffent motorbikes, instead of three
motorbikes with the standard set of commands.
N.B.: The range and quality of the communication may very significantly depending on the presence of
obstacles, weather conditions, magnetic fields.
N.B.: The range of the communication varies depending on the N-Com systems used.