User Guide
Setting Up 95
Novell DNS/DHCP Management Utility Administration Guide
103-000164-001
September 4, 2001
Novell Confidential
Manual 99a38 July 17, 2001
“Modifying an Existing IP Address Object” on page 100
“Creating a Subnet Pool Object” on page 101
“Modifying a Subnet Pool Object” on page 102
Modifying a DHCP Server Object
Refer to “Creating a DHCP Server Object” on page 91 for information about
creating a DHCP Server object. After a DHCP Server object has been created,
you can modify its configuration parameters by completing the following
steps:
1 Click DHCP Management > DHCP Server Management to open the
DHCP Server Management window in the main panel.
2 Select Modify Server from the drop-down menu > click OK to open the
Modify DHCP Server window.
3 Select the DHCP Server object from the drop-down menu.
4 Click OK.
You are led through a set of steps by which you can modify the following
parameters:
Subnet Address Range Serviced by the Server: This displays
information about the range of addresses that can be dynamically
assigned by the server.
Subnet Serviced by the Server: This displays information about the
subnet to which the server can assign addresses.
Comments: You can type comments about the DHCP server in this
box. This is an optional parameter.
Set SNMP Traps Option: SNMP traps control DHCP server event
trapping. Choose from the following options:
- None: Turns off SNMP traps
- Major Events: Traps only critical events (default)
- All: Traps both major and minor events
Management applications such as Novell ManageWise
®
software
help you monitor traps.