Getting Started Guide

11TouchScreen TCA 400 Getting Started Guide – Installation
Tap the Security Status shield when it is in
Disarmed - Ready state.
1
3
2
4
The Arm Modes screen is displayed with a
keypad and “Away” selected as the default
arm mode.
Select the desired arm mode (not required
for Away) and enter your keypad code.
The Touchscreen will begin the Exit Delay
period and the screen changes
to display a countdown timer.
The LED turns red when the system is
armed. The text of the message will vary,
depending on which arm mode you
selected.
Arming the System from Touchscreen
To arm the system from Touchscreen:
Special Rules
If you selected Arm Away mode, you have until the Exit Delay is over to exit the premises.
Otherwise, the system is automatically armed in Arm Stay mode. There is still an Exit Delay
period for the other Arm modes, but they do not require that the door open and close during
the period.
If you open and shut an Entry/Exit door during the Exit Delay and then re-enter the premise, the
Exit delay restarts at 120 seconds for Arm Stay and Arm Night or 60 seconds for Arm Away. It will
only do this one time.
If an Entry/Exit door is left open at the end of Exit Delay, the Entry Delay immediately starts and,
if the system is not disarmed, an alarm will sound.