Network Router User Manual
2.1.5. WiFi Setup in Windows XP
• Go to the network connections control panel. Right click wireless connection and select
properties.
• Select the general tab. Set the IP address to one that is in the same subnet as the GRouter’s
default IP of 10.0.2.40 with a subnet mask of 255.255.255.0. For example you could use
10.0.2.41.
• Go to network properties and select the connection tab. Select manual connect to an available
wireless network not automatically connect.
• In the main network connections control panel, create a new wireless network by selecting
"add new network". Use the following settings the the network:
◆ In the Association Tab set the following elds:
■ SSID: "Adept"
■ Network Auth: open
■ Data Encryption : Disabled
■ Check the "this is a computer to computer network(ad-hoc)" box.
◆ In the Authentication Tab leave the settings at the defaults.
◆ In the Connection Tab set the following:
■ Check the "connect when this network is in range" box.
• Click Ok, then Ok again to save the settings.
• Aer a minute or two the computer will automatically connect to the GRouter
• You can now access the GRouter's conguration web pages through a web browser using a url
of "http://10.0.2.40".
-29-