Network Router User Manual
Side A Data IP Port: is eld appears when the router is in 852 bridge mode. It allows the user
to set or change the Side A unicast IP port of the router. To change the port, type in the new port
number (0-65535), and click the Submit Changes button.
Side A CongServer IP Address: is eld appears only when the router is operating in 852
Bridge mode and Side A is in Normal Mode. is is the unicast IP host address of the
conguration server for the Side A 852 channel. To change the value in the eld, type in the new
value in the dotted format XX.XX.XX.XX and click the Submit Changes button.
Side A CongServer IP Port: is eld appears when the router is in 852 bridge mode and Side A
is in Normal mode. It allows the user to set or change the Side A unicast IP port of the cong
server for the Side A 852 channel. To change the port, type in the new port number (0-65535),
and click the Submit Changes button.
Side B Data IP Port: is eld appears when the router is in 852 bridge mode. It allows the user
to set or change the Side B unicast IP port of the router. To change the port, type in the new port
number (0-65535), and click the Submit Changes button.
Side B CongServer IP Address: is eld appears only when the router is operating in 852 Bridge
mode and Side B is in Normal Mode. is is the unicast IP host address of the conguration
server for the Side B 852 channel. To change the value in the eld, type in the new value in the
dotted format XX.XX.XX.XX and click the Submit Changes button.
Side B CongServer IP Port: is eld appears when the router is in 852 bridge mode and Side B
is in Normal mode. It allows the user to set or change the Side B unicast IP port of the cong
server for the Side B 852 channel. To change the port, type in the new port number (0-65535),
and click the Submit Changes button.
Register With Cong Server: is button sends an 852 registration request to the appropriate
cong server for Side A and separately to the cong server for Side B when either/both Side A
and Side B are in normal mode. is will usually add the device to the cong server’s list of
managed devices.
-39-