Owner manual

10. The A-computer energizes supply 4 and
displays " ". Hold this state until operatorS4
presses advance (up+down).
11. The A-computer energizes the heat output
and displays " ". Hold this state until operatorht
presses advance (up+down).
12. The A-computer energizes the fwd output
and opens the drain until all three water levels
turn off. The display shows “ ”. Hold thisdrin
state for 5 additional seconds
13. The A-computer energizes the spin output,
displays " " and hold this state until theSPin
operator presses the down arrow or advance
(up+down).
14. The A-computer de-energizes the spin relay
and holds for 20 sec.
15. The A-computer de-energizes the fwd relay
and holds for 30 sec.
16. The A-computer energizes the door output
and display " " as normal.donE
9
Operation