ServSwitch User's Manual

72
MATRIX SERVSWITCH™
5.3 User Stations Attached to Same-Numbered Ports
When there are no more than two users in a Matrix ServSwitch system, both of
these users have completely independent global access: that is, each of them can reach
any computer in the system, and their actions have no effect on each other, unless
one tries to select the same CPU that the other is using (see Section 5.4). This is
true as long as the user stations are attached to different-numbered KVM ports:
One user must be on KVM 1 and the other must be on KVM 2, even if the user
stations are attached to different Switches.
In a daisychained Matrix ServSwitch system with multiple Switches, it is possible
to attach additional user stations to the system, so that three or more users can
share access to the Switches. This can obviously be very useful when more than just
two people need to access your CPUs, or if your CPUs need to be accessible from
more than one or two locations. What you must keep in mind when you do this,
however, is that all of the users on KVM ports with the same number (all of those
on KVM 1 and all of those on KVM 2) have to use the same keyboard/video/
mouse bus that’s carried from Switch to Switch over the Expansion Cables that
connect them.
What this means is that as long as users on same-numbered KVM ports remain
local users—that is, as long as they only select CPUs that are directly attached to
their local Switch—they can continue to operate independently of one another.
But when any of these users makes a global connection to a CPU on some other
Switch in the system, they must make exclusive use of the Switch system’s KVM bus
for their port (KVM 1 or KVM 2); all other user stations on the same KVM port
receive a “video path cancel” message and are disconnected from any CPU they
currently have selected. None of these users can select any CPUs until the global
user relinquishes control of the CPU he or she just selected.
This being the case, we recommend that in any Matrix ServSwitch system with
three or more users, you reserve one KVM port or the other (KVM 1 or KVM 2) for
a single global user: Connect one and only one user to the ports with this number,
and he or she will always be able to access any computer in your system. Let the
other port number be for multiple local users who will normally work with the
computers attached to their own Switch only, not making global connections to
computers on other Switches unless it’s absolutely necessary.