ServSwitch User's Manual

78
MATRIX SERVSWITCH™
6.2 Display Configuration Menu: [Ctrl] [F12]
This command (press and release left [Ctrl], then press and release function key
[F12]) causes the Matrix ServSwitch to display its main configuration menu on
screen. For more information about this menu and all of the configuration
functions accessible through it, see Chapter 4.
6.3 Display CPU List: [Ctrl] [Esc]
This command (press and release left [Ctrl], then press and release the escape key
[Esc]) causes the Matrix ServSwitch to display, as shown below, a list of all CPU
ports attached to the system—at least all of the ones whose CPU numbers are less
than the system’s current “Maximum computer” setting (see Section 4.2.1). (In
order to fill the display, even CPU ports with numbers higher than the maximum
computer will sometimes be displayed.) A diamond will appear next to the number
of the computer you currently have selected. To select a different computer,
highlight its name and press [Enter]. Press the [PageUp] and [PageDn] keys to
scroll through the list. If you want to remove this list from the screen without
selecting a computer, press [Esc].
If you select a computer from the list, and the selection goes through, you will
see a “Connection successful” message (see Section 5.2.1), and you will have as
much access to that computer as your user profile’s connection-mode setting
allows (see Sections 4.6 and 5.4). If your selection fails, you will see a “Connection
failed” message stating the reason why (see Section 5.2.2).
Figure 6-1. The CPU list.
Computer select menu
1 Mail Server
2 NT Server 1
3 NT Server 2
4
♦ NT Server 3
5 Inventory
6 Inventory 2
7 Sales domain
8 Computer 8
9 Computer 9
10 Computer 10
11 Computer 11
12 Computer 12
13 Computer 13
14 Computer 14
15 Computer 15
16 Computer 16
Mail Server
Computer select menu