User manual

12 ◆ SPrint User Manual
Transmitting Coil
The transmitting coil is attached to the microphone
by the transmitting cable and is held securely in
place by magnetic attraction between a magnet in
the coil and a magnet in the implanted unit.
Note:
Your transmitting coil may look slightly
different to the one shown.
Figure 3: The transmitting coil
HS8 Headset
The headset consists of:
• a transmitting coil worn over the implant
• a microphone case worn behind the ear
• a short transmitting cable to connect the
transmitting coil to the microphone
• a long headset cable to connect the microphone
to the SPrint speech processor.
INTRODUCTION
N02210F ISS4 DO2.qxd 24/4/02 1:12 PM Page 12