HP Matrix Operating Environment 7.3 Update 1 Installation and Configuration Guide for Provisioning with Virtual Resources

c. In the Analyze Systems step, analyze each system to determine whether licenses, agents,
or other configuration tasks are needed to enable the selected management features.
i. Each result shows one of the following status:
Success indicates the system is correctly configured for a selected
management feature.
Configuration will
occur
indicates the system is not currently configured, and will be
configured by the wizard in a following step.
Warning indicates the system is configured correctly, but some related
configuration changes could be performed to make management
better/easier/more complete.
Failed indicates the analysis could not be completed or there are
problems with the system that cannot be corrected by the wizard.
Typically, these result from the system being improperly
discovered, having the wrong credentials, having a firewall
preventing communication with the system, missing HP
management agents on the system, and so forth.
ii. Correct any system operations which failed.
When there is a failure in the step, you must correct the error or deselect the system
before you can move on. Otherwise, the following message displays:
72 Configuring and licensing with managed system setup wizard